ALSRobot Starduino Uno R3 Arduino Compatible Controller


    • New High Quality Electronic Components to Ensure Product Quality
    • Advanced Configuration and USB Interface
    • A better circuit design
    • contains everything needed to support the microcontroller

    Product Detail

    • Product Dimensions: 0.11 pounds
    • Shipping Weight: 0.11 pounds
    • ASIN: B00M8PPV8G
    • Item model number:
    • Average Customer Review: Customer Reviews

    Product Description

    This Starduino Uno R3 controller is produced by ALSRobot.It is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; Simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
    New High Quality Electronic Components to Ensure Product Quality
    Each of the 14 digital pins on the Uno can be used as an input or output, using pinMode(), digitalWrite(), and digitalRead() functions. They operate at 5 volts. Each pin can provide or receive a maximum of 40mA and has an internal pull-up resistor (disconnected by default) of 20-50 kOhms. In addition, some pins have specialized functions:--Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data. These pins are connected to the corresponding pins of the ATmega8U2 USB-to-TTL Serial chip.
    This Uno has 6 analog inputs, labeled A0 through A5, each of which provide 10 bits of resolution
    Operating Voltage 5V
    Input Voltage (recommended) 7-12V
    Input Voltage (limits) 6-20V
    Digital I/O Pins 14 (of which 6 provide PWM output)
    Analog Input Pins 6
    DC Current per I/O Pin 40 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
    SRAM 2 KB (ATmega328)
    EEPROM 1 KB (ATmega328)
    Clock Speed 16 MHz
    High Performance, Low Power AVR® 8-Bit Microcontroller
    High Endurance Non-volatile Memory Segments
    I/O and Packages
    - 23 Programmable I/O Lines
    - 28-pin PDIP, 32-lead TQFP, 28-pad QFN/MLF and 32-pad QFN/MLF
    Operating Voltage: 1.8 - 5.5V for ATmega48PA/88PA/168PA/328P
    Temperature Range: -40°C to 85°C
    Speed Grade: 0 - 20 MHz @ 1.8 - 5.5V

    Customers Who Bought This Item Also Bought